Blog

57-inch scrap handler magnet for sale

Size:    57”/ 1450 mm Model:    DASH Coil type:   Aluminum Field:    Deep Weight:   4700 lbs/2140 kg Voltage:   230 DC Cold amperage:  60.5 Cold ohms:   3.8 Kilowatts:   13.9 Duty cycle:   75% Average All Day Lifting Capacities #1 Hot Melt         3200 lbs/1454 kg #2 Hot Melt          2050 lbs/ 930 kg Steel Turnings          1000 lbs/ 454 kg Plate Punchings       3900 lbs/ 1775 kg

Read More »

Thank you to our Veterans

Thank you to all Veterans for their service to our great country. We are especially proud of our own Veterans: Roger A, Ed, Paul, Dave H, Tim, Steve M, Rodney, Mike P, Doug R and Chad. A shout out to Michael who is an active Marine Reserve.

Read More »

Reasons to purchase a new lift magnet

Industry is seeing a trend in the number of new lift magnets being manufactured.  There has been a reduction in the amount of weld and steel in many scrap handling lift magnets. The case walls and outer poles have been thinned and accept less punishment than in the past. Some

Read More »

47 inch scrap handler magnet for sale

Size: 47″/ 1200 mm Model: DASH Coil type: Aluminum Field: Deep Weight: 3200 lbs/1460 kg Voltage: 230 DC Cold amperage: 42 Cold ohms: 5.5 Kilowatts: 9.7 Duty cycle: 75%   Average All Day Lifting Capacities #1 Hot Melt 1900 lbs/ 865 kg #2 Hot Melt 1100 lbs/ 500 kg Steel

Read More »

Safe testing procedures of lift magnets

When inspecting or servicing a lift magnet, please keep in mind the following safe testing procedures: 1. Lockout/tagout all energy sources prior to testing the magnet. 2. Double-check for voltage at the lift magnet prior to disconnecting it:  a. Verify lockout/tagout  b. Probe the cable with sharp voltmeter leads or

Read More »

Increase the life of a lift magnet

A number of simple actions can be taken to extend the operating life of a lift magnet. The following recommendations will help keep your magnet operating properly, avoid costly major repairs and signal if it’s time to get your magnet services by a company who is experienced in the design,

Read More »