Blog

Gearbox repairs are CMT’s specialty

Is your gearbox noisy, vibrating, leaking? There are many moving parts on a gearbox like gears, bearings, shafts, clutches and couplings. CMT can repair all gearboxes. Our capabilities include machine work, shafts, housing, bearing bores, NDT, babbitt bearings, assembly and testing.

Read More »

Top tips to prolong motor life

What are the top tips to ensure motor life? Confirm you have the correct motor for the application and location. Read, understand and save a picture of the nameplate. Install and properly align the motor. Establish a preventative maintenance program. Relubricate with the correct type and amount of grease. And,

Read More »

Turn to CMT for all Babbitt bearings needs

Babbitt bearings rely on oil-fed lubrication to work and can be in service for decades in turbines, large motors, fans and blowers used in power plants, military ships and in industrial manufacturing facilities. When Babbitt bearings come out of tolerance or fail, turn to CMT. CMT uses the spin cast

Read More »

CMT can remanufacture all pump designs

Pump problems? CMT has the capabilities to remanufacture all pump designs. There are two basic designs for a submersible pump, which are designed for water. Integral motor driven where the motor and pump are under water. External motor driven where the pump is under water. If the pump screen becomes

Read More »

CMT can get your (AC and DC) motors running

Electric motor running hot? Temperature can create both mechanical and electrical drive failures. What causes temperature changes in a motor? Location, restricted ventilation, overload, imbalanced voltage, low voltage, duty cycle and inverter induced heat are some examples. CMT repairs AC and DC electric motors.

Read More »

CMT can handle fabrication work

CMT can handle fabrication. CMT worked on a 2khp motor bonnet. The motor bonnet needed rush repair. CMT also performed preventative maintenance on-site in a difficult area to access. CMT is your single source vendor for motor repair, industrial machine work, preventative and predictive maintenance, reverse engineering and lifting magnet

Read More »